Description: This metadata record describes the topographic mapping of Hot Springs, AR during 2007. Products generated include lidar point clouds in LAS 1.0 format, random-spacing ASCII bare earth DEM, gridded DEM in ASCII format, 2 foot contours using lidar collected with a Leica ALS-50 Aerial Lidar Sensor.
Description: This is Statewide seamless 1 Meter Digital Elevation Model made up of both tiles of the National Elevation Dataset (NED) and tiles delivered as a function of the original project specifications in deliverables. Data in this layer represent a bare earth surface. The National Elevation Dataset (NED) serves as the elevation layer of The National Map, and provides basic elevation information for earth science studies and mapping applications in the United States. Scientists and resource managers use NED data for global change research, hydrologic modeling, resource monitoring, mapping and visualization, and many other applications. The NED is an elevation dataset that consists of seamless layers and non-seamless high resolution layers. Each of the seamless layers are composed of the best available raster elevation data of the conterminous United States, Alaska, Hawaii, territorial islands, Mexico and Canada. The NED is updated continually as new data become available. All NED data are in the public domain. The NED is derived from diverse source data that are processed to a common coordinate system and unit of vertical measure. The spatial reference used for tiles of the one meter layer within the conterminous United States (CONUS) is Universal Transverse Mercator (UTM) in units of meters, and in conformance with the North American Datum of 1983 (NAD83). All bare earth elevation values are in meters and are referenced to the North American Vertical Datum of 1988 (NAVD88). Each tile is distributed in the UTM Zone in which it lies. If a tile crosses two UTM Zones, it is delivered in both zones. Only source data of one meter resolution or finer are used to produce the NED standard one meter layer
Definition Expression: N/A
Copyright Text: USGS produced DEMs, aggregated by Arkansas GIS Office
Description: This dataset consists of 2 foot interval contour lines with ground elvation contained in the 3D geometry attribute data. Fugro EarthData, Inc collected LiDAR for approximately 714 square miles at 1.0 points per square meter (1.0m GSD) for the FEMA project area the southeast portion of Pulaski County in 2010, and most of the remaining part of the County in 2011. The extreme northeastern part of Pulaski County (essentially north of Highay 89 was not collected. Dewberry used proprietary procedures to classify the LAS according to project specifications: 1-Unclassified, 2-Ground, 7-Noise, 9-Water, 10-Ignored Ground, 11-Withheld Points. Dewberry produced 3D breaklines and combined these with the final LiDAR data to produce seamless hydro flattened DEMs for the 199 tiles (10,000 ft x 10,000 ft) that cover the project area. The contour data was generated from the bare earth DEM and DTM data.
Definition Expression: N/A
Copyright Text: Federal Emergency Managment Agency (FEMA), Pulaski Area GIS (PAgis), Central Arkansas Water, City of Jacksonville, City of Little Rock, City of North Little Rock, City of Sherwood, Little Rock Wastewater, North Little Rock Wastewater, Pulaski County Public Works, Arkansas National Guard / Camp Robinson, and the United State Geological Survey (USGS).