asdi.water.WATERSHED_BOUNDARY_DATASET

SDE Feature Class

Tags
inlandWaters, Sub-basin, boundaries, Basin, Watershed Boundaries, Watershed Boundary Dataset, HUC, Hydrologic Units, Region, Watershed, Subwatershed, Hydrologic Unit Code, Sub-region, WBD, NRCS


Summary

The Watershed and Subwatershed hydrologic unit boundaries provide a uniquely identified and uniform method of subdividing large drainage areas. The smaller sized 6th level sub-watersheds (up to 250,000 acres) are useful for numerous application programs supported by a variety of local, State, and Federal Agencies. This data set is intended to be used as a tool for water-resource management and planning activities, particularly for site-specific and localized studies requiring a level of detail provided by large-scale map information. The dataset will be appended to a larger seamless nationally consistent geospatial database as other states complete their portion of the watershed boundary dataset.

Description

This data set is a complete digital hydrologic unit boundary layer to the Subwatershed (12-digit) 6th level for the State of Arkansas. This data set consists of geo-referenced digital data and associated attributes created in accordance with the "FGDC Proposal, Version 1.0 - Federal Standards For Delineation of Hydrologic Unit Boundaries 3/01/02"(http://www.ftw.nrcs.usda.gov/huc_data.html). Polygons are attributed with hydrologic unit codes for 4th level sub-basins, 5th level watersheds, 6th level subwatersheds, name, size, downstream hydrologic unit, type of watershed, non-contributing areas and flow modification. Arcs are attributed with the highest hydrologic unit code for each watershed, linesource and a metadata reference file.

Credits

The dataset was created by the coordinated effort between multiple agencies including; Arkansas Natural Resources Commission (ANRC), USDA Arkansas, USDA Forest Service- Ozark-St. Francis National Forest, USGS Arkansas, USGS Utah, USGS Mississippi, Arkansas Game and Fish Commission, Arkansas Heritage Commission, Arkansas GIS User's Forum, Arkansas Department of Environmental Quality, Arkansas Geologic Commission, University of Arkansas at Monticello and University of Arkansas at Fayetteville. NRCS provided the oversight and did a major portion of the delineations and attribution in the eastern portion of the state and portions of the Upper White River area, as well as some areas along the middle and lower portions of the Arkansas side of the Mississippi. Over the past 1-1/2 years USGS in Arkansas as well as USGS in Utah have, under an agreement with NRCS and the State of Arkansas, completed the remainder of the states line work and attribution, appended the dataset together.

Use limitations

The distributor shall not be held liable for improper or incorrect use of this data, based on the description of appropriate/inappropriate uses described in this metadata document. It is strongly recommended that this data is directly acquired from the distributor and not indirectly through other sources which may have changed the data in some way. These data should not be used at scales greater than 1:24,000 for the purpose of identifying hydrographic watershed boundary feature locations in Arkansas. The NRCS should be acknowledged as the data source in products derived from these data. The Arkansas Watershed Boundary Dataset is public information and may be interpreted by all organizations, agencies, units of government, or others based on needs; however, they are responsible for the appropriate application of the data. Federal, State, or local regulatory bodies are not to reassign to the Natural Resources Conservation Service any authority for the decisions they make. The Natural Resources Conservation Service will not perform any evaluations of these maps or purposes related solely to State or local regulatory programs. Photographic or digital enlargement of these maps to scales greater than that at which they were originally delineated can result in misrepresentation of the data. If enlarged, the maps will not include the fine detail that would be appropriate for mapping at the small scale. Digital data files are periodically updated. Files are dated, and users are responsible for obtaining the latest version of the data from the source distributor.

Extent

West  -95.945213    East  -88.908721
North  37.733140    South  31.800541

Scale Range

ArcGIS Metadata 

Topics and Keywords 

Themes or categories of the resource  inlandWaters, boundaries


*Content type  Downloadable Data


Theme keywords  inlandWaters, Sub-basin, boundaries, Basin, Watershed Boundaries, Watershed Boundary Dataset, HUC, Hydrologic Units, Region, Watershed, Subwatershed, Hydrologic Unit Code, Sub-region, WBD, NRCS

Citation 

Title asdi.water.WATERSHED_BOUNDARY_DATASET


Presentation formats  digital map
FGDC geospatial presentation format  vector digital data


Resource Details 

Dataset languages  English (UNITED STATES)


Spatial representation type  vector


Processing environment Microsoft Windows 7 Version 6.1 (Build 7601) Service Pack 1; Esri ArcGIS 10.3.0.4322


Credits
The dataset was created by the coordinated effort between multiple agencies including; Arkansas Natural Resources Commission (ANRC), USDA Arkansas, USDA Forest Service- Ozark-St. Francis National Forest, USGS Arkansas, USGS Utah, USGS Mississippi, Arkansas Game and Fish Commission, Arkansas Heritage Commission, Arkansas GIS User's Forum, Arkansas Department of Environmental Quality, Arkansas Geologic Commission, University of Arkansas at Monticello and University of Arkansas at Fayetteville. NRCS provided the oversight and did a major portion of the delineations and attribution in the eastern portion of the state and portions of the Upper White River area, as well as some areas along the middle and lower portions of the Arkansas side of the Mississippi. Over the past 1-1/2 years USGS in Arkansas as well as USGS in Utah have, under an agreement with NRCS and the State of Arkansas, completed the remainder of the states line work and attribution, appended the dataset together.

ArcGIS item properties
*Name asdi.WATER.WBD_HU_COMBINED_2010
*Location Server=170.94.248.50; Service=sde:sqlserver:170.94.248.50; Database=asdi; User=water; Version=dbo.DEFAULT
*Access protocol ArcSDE Connection

Extents 

Extent
Geographic extent
Bounding rectangle
West longitude -95.945213
East longitude -88.908721
South latitude 31.800541
North latitude 37.73314

Extent
Geographic extent
Bounding rectangle
Extent type  Extent used for searching
*West longitude -95.945213
*East longitude -88.908721
*North latitude 37.733140
*South latitude 31.800541
*Extent contains the resource Yes

Extent in the item's coordinate system
*West longitude 240326.468900
*East longitude 860923.576100
*South latitude 3524659.668200
*North latitude 4176206.983800
*Extent contains the resource Yes

Resource Points of Contact 

Point of contact
Individual's name Arkansas Geographic Information Systems Office
Organization's name State of Arkansas
Contact's role  point of contact


Contact information
Phone
Voice 501-682-2676
Fax 501-682-6077

Address
Type both
Delivery point 1 Capitol Mall Suite 6D
City Little Rock
Administrative area AR
Postal code 72201
e-mail addresscommunication@arkansasgisoffice.org



Resource Maintenance 

Resource maintenance
Update frequency  unknown


Resource Constraints 

Legal constraints
Limitations of use
See access and use constraints information.

Constraints
Limitations of use
The distributor shall not be held liable for improper or incorrect use of this data, based on the description of appropriate/inappropriate uses described in this metadata document. It is strongly recommended that this data is directly acquired from the distributor and not indirectly through other sources which may have changed the data in some way. These data should not be used at scales greater than 1:24,000 for the purpose of identifying hydrographic watershed boundary feature locations in Arkansas. The NRCS should be acknowledged as the data source in products derived from these data. The Arkansas Watershed Boundary Dataset is public information and may be interpreted by all organizations, agencies, units of government, or others based on needs; however, they are responsible for the appropriate application of the data. Federal, State, or local regulatory bodies are not to reassign to the Natural Resources Conservation Service any authority for the decisions they make. The Natural Resources Conservation Service will not perform any evaluations of these maps or purposes related solely to State or local regulatory programs. Photographic or digital enlargement of these maps to scales greater than that at which they were originally delineated can result in misrepresentation of the data. If enlarged, the maps will not include the fine detail that would be appropriate for mapping at the small scale. Digital data files are periodically updated. Files are dated, and users are responsible for obtaining the latest version of the data from the source distributor.

Spatial Reference 

ArcGIS coordinate system
*Type Projected
*Geographic coordinate reference GCS_North_American_1983
*Projection NAD_1983_UTM_Zone_15N
*Coordinate reference details
Projected coordinate system
Well-known identifier 26915
X origin -5120900
Y origin -9998100
XY scale 10000
Z origin 0
Z scale 1
M origin 0
M scale 1
XY tolerance 0.001
Z tolerance 0.001
M tolerance 0.001
High precision true
Latest well-known identifier 26915
Well-known text PROJCS["NAD_1983_UTM_Zone_15N",GEOGCS["GCS_North_American_1983",DATUM["D_North_American_1983",SPHEROID["GRS_1980",6378137.0,298.257222101]],PRIMEM["Greenwich",0.0],UNIT["Degree",0.0174532925199433]],PROJECTION["Transverse_Mercator"],PARAMETER["False_Easting",500000.0],PARAMETER["False_Northing",0.0],PARAMETER["Central_Meridian",-93.0],PARAMETER["Scale_Factor",0.9996],PARAMETER["Latitude_Of_Origin",0.0],UNIT["Meter",1.0],AUTHORITY["EPSG",26915]]

Reference system identifier
*Value 26915
*Codespace EPSG
*Version 8.2.6


Spatial Data Properties 

Vector
*Level of topology for this dataset  geometry only


Geometric objects
Feature class name asdi.WATER.WBD_HU_COMBINED_2010
*Object type  composite
*Object count 2328



ArcGIS Feature Class Properties
Feature class name asdi.WATER.WBD_HU_COMBINED_2010
*Feature type Simple
*Geometry type Polygon
*Has topology FALSE
*Feature count 2328
*Spatial index TRUE
*Linear referencing FALSE



Distribution 

Distributor
Contact information
Individual's name Arkansas GIS Office
Organization's name State of Arkansas
Contact's role  distributor


Contact information
Phone
Voice 501-682-2929

Address
Type physical
Delivery point 1 Capitol Mall, Suite 6D
City Little Rock
Administrative area AR
Postal code 72212
Country US
e-mail addresscommunication@arkansasgisoffice.org



Ordering process

Transfer options
Online source
Location https://gis.arkansas.gov/arcgis/rest/services/FEATURESERVICES/Water/FeatureServer/38

Online source
Locationhttp://gis.arkansas.gov/product/watershed-boundary-dataset-polygon/



Distribution format
*Name SDE Feature Class


Fields 

Details for object asdi.WATER.WBD_HU_COMBINED_2010 
*Type Feature Class
*Row count 2328


Field objectid
 
*Alias OBJECTID
*Data type OID
*Width 4
*Precision 10
*Scale 0
*Field description
Internal feature number.

*Description source
Esri

*Description of values
Sequential unique whole numbers that are automatically generated.





Field huc_8
 
*Alias HUC_8
*Data type String
*Width 8
*Precision 0
*Scale 0




Field huc_10
 
*Alias HUC_10
*Data type String
*Width 10
*Precision 0
*Scale 0




Field huc_12
 
*Alias HUC_12
*Data type String
*Width 12
*Precision 0
*Scale 0




Field acres
 
*Alias ACRES
*Data type Double
*Width 8
*Precision 38
*Scale 8




Field ncontrb_a
 
*Alias NCONTRB_A
*Data type Double
*Width 8
*Precision 38
*Scale 8




Field hu_10_gnis
 
*Alias HU_10_GNIS
*Data type String
*Width 23
*Precision 0
*Scale 0




Field hu_12_gnis
 
*Alias HU_12_GNIS
*Data type String
*Width 23
*Precision 0
*Scale 0




Field hu_10_ds
 
*Alias HU_10_DS
*Data type String
*Width 10
*Precision 0
*Scale 0




Field hu_10_name
 
*Alias HU_10_NAME
*Data type String
*Width 80
*Precision 0
*Scale 0




Field hu_10_mod
 
*Alias HU_10_MOD
*Data type String
*Width 20
*Precision 0
*Scale 0




Field hu_10_type
 
*Alias HU_10_TYPE
*Data type String
*Width 1
*Precision 0
*Scale 0




Field hu_12_ds
 
*Alias HU_12_DS
*Data type String
*Width 12
*Precision 0
*Scale 0




Field hu_12_name
 
*Alias HU_12_NAME
*Data type String
*Width 80
*Precision 0
*Scale 0




Field hu_12_mod
 
*Alias HU_12_MOD
*Data type String
*Width 20
*Precision 0
*Scale 0




Field hu_12_type
 
*Alias HU_12_TYPE
*Data type String
*Width 1
*Precision 0
*Scale 0




Field meta_id
 
*Alias META_ID
*Data type String
*Width 4
*Precision 0
*Scale 0




Field states
 
*Alias STATES
*Data type String
*Width 20
*Precision 0
*Scale 0




Field se_anno_cad_data
 
*Alias SE_ANNO_CAD_DATA
*Data type Blob
*Width 0
*Precision 0
*Scale 0




Field shape
 
*Alias Shape
*Data type Geometry
*Width 4
*Precision 0
*Scale 0
*Field description
Feature geometry.

*Description source
Esri

*Description of values
Coordinates defining the features.





Field shape.STArea()
 
*Alias shape.STArea()
*Data type Double
*Width 0
*Precision 0
*Scale 0




Field shape.STLength()
 
*Alias shape.STLength()
*Data type Double
*Width 0
*Precision 0
*Scale 0






Overview Description
Entity and Attribute Overview
1) .pat attributes Huc_8 : Eight Digit Hydrologic Unit Code - (REQUIRED) A unique 8-digit code from the USGS map series "Hydrologic Unit Maps". The same number was used in every record that pertains to a subwatershed that resides within the same 8-digit sub-basin.Numbers were assigned in an upstream to downstream fashion. Where no downstream/upstream relationship could be determined numbers were assigned in a clockwise fashion. Huc_10: Ten Digit Hydrologic Unit Code - (REQUIRED) This field provides a unique 10-digit code for each watershed. This same number was used in every record that pertains to a subwatershed that resides within the same 10-digit watershed. Numbers were assigned in an upstream to downstream fashion. Where no downstream/upstream relationship could be determined numbers were assigned in a clockwise fashion. Huc_12: Twelve Digit Hydrologic Unit Code - (REQUIRED) This field provides a unique 12-digit code for each subwatershed. Numbers were assigned in an upstream to downstream fashion. Where no downstream/upstream relationship could be determined numbers were assigned in a clockwise fashion. Acres: Acres - (REQUIRED) Area of subwatershed including non-contributing areas calculated to acres as a whole number, no decimals. The "Acres" field was calculated from the "Area" field. States: States - (REQUIRED) The "States" field includes the names of all state(s) that the subwatershed falls within. The 2-digit postal abbreviation in upper case and in alphabetical order was used, separated with a comma. Ncontrb_a: Non-Contributing Area - (FIELD REQUIRED, ATTRIBUTES OPTIONAL) Drainage areas that do not flow toward the outlet of any hydrologic unit are considered non-contributing. If a non-contributing area is on the boundary between two or more hydrologic units, the non-contributing area is associated with the hydrologic unit adjacent to the low point on the boundary. This attribute should be the total of the non-contributing areas within a hydrologic unit calculated in acres. Hu_10_ds: Fifth Level Downstream Hydrologic Unit Code - (FIELD REQUIRED, ATTRIBUTES OPTIONAL) This field has the 10-digit code of the 5th level hydrologic unit that is receiving the majority of the flow from the watershed that the 6th level HU falls within. Outlets created by ditching or other artificial drainage were not considered for this field. If an HU flows into an ocean or the Gulf of Mexico, this field was populated with "OCEAN" and if a HU flows into one of the Great Lakes the term "LAKE" was used. If a HU flows across international borders, "CANADA" or "MEXICO" was used depending on which country the HU drains into. If an HU is a closed basin, then the term "CLOSED BASIN"was used. Hu_10_name: Fifth Level Hydrologic Unit Name - (FIELD REQUIRED, ATTRIBUTES OPTIONAL) This field used officially recognized names only. This field was populated by following the directions in subsection 6.3 "Watershed and Subwatershed Naming Protocol". The name used to attribute the watershed was used only once within a 4th level unit. Hu_10_mod: Fifth Level Hydrologic Unit Modifications - (REQUIRED) This field identifies any type of modifications to natural overland flow that alters the location of the hydrologic unit boundary for a 10-digit watershed. This field shows the most significant to least significant modification(s) to the watershed boundary. One or more of the following abbreviations was used. SC - Stormwater Canal or Drainage Canal ID - Irrigation Ditch IT - Interbasin Transfer BC - Barge Canal or Navigation Canal SD - Stormwater Ditch PD - Pipe Diversion CD - Channel Diversion NC - Noncontributing Area KA - Karst LE - Levee NM - No Modifications OC - Overflow Channel or Flume DM - Dam at outlet or HU boundary GC - General Canal/Ditch PS - Pumping Station DD - Drainage Ditch SI - Siphon AD - Aqueduct RS - Reservoir TF - Transportation Feature (road, railroad, docks etc.) GF - Ground-Water Flow MA - Mining Activity UA - Urban Area GL - Glacier IF - Ice Field OF - Overbank Flow OT - Other Hu_10_type: Fifth Level Hydrologic Unit Type - (REQUIRED) Populate this field with the hydrologic unit type from the list provided that most closely identifies the watershed. Use any of the one-digit abbreviations in uppercase that is provided in the list. S - "Standard" hydrologic unit - Any land HU with drainage flowing to a single outlet point, excluding non-contributing areas. This includes areas or small triangular wedges between adjacent HU's that remain after classic hydrologic units are delineated. Some examples include "true", "classic", "composite", and "remnant" hydrologic units. C - "Closed Basin" hydrologic unit - A drainage area that is 100% non-contributing. This means all surface flow is internal, no overland flow leaves the hydrologic unit through the outlet point. F - "Frontal" hydrologic unit - Areas along the coastline of lakes, oceans, bays, etc. that have more than one outlet. These HU's are predominantly land with some water areas at or near the outlet(s). W - "Water" hydrologic unit - Hydrologic units that are predominantly water with adjacent land areas, ex. lake, easturies, harbors. I - "Island" hydrologic unit - A hydrologic unit that is one or more islands and adjacent water out to the toe of the shore face. U - "Unclassified" hydrologic unit - A hydrologic unit that can't be defined or doesn't fit into one of the types that have been listed. Hu_12_ds: Sixth Level Downstream Hydrologic Unit Code - (FIELD REQUIRED, ATTRIBUTES OPTIONAL) Populate this field with the 12-digit code of the 6th level hydrologic unit that is receiving the majority of the flow from the subwatershed. Outlets created by ditching or other artificial drainage are not to be considered for this field. If a HU flows into an ocean or the Gulf of Mexico populate this field with "OCEAN" and if a HU flows into one of the Great Lakes use the term "LAKE". If a HU flows across international borders use "CANADA" or "MEXICO" depending on which country the HU drains into. If an HU is a closed basin, then populate this record with the term "CLOSED BASIN". Hu_12_name: Sixth Level Hydrologic Unit Name - (FIELD REQUIRED, ATTRIBUTES OPTIONAL) This field is for officially recognized names only. Populate this field by following the directions in subsection 6.3 "Watershed and Subwatershed Naming Protocol". The name used to attribute the subwatershed should be used only once within a 6th level unit. Some 10-digit HU were assigned the huc_12 number when no GNIS name was identified on the DRG-Es. Hu_12_mod: Sixth Level Hydrologic Unit Modifications - (REQUIRED) This field should identify any type of modifications to natural overland flow that alters the location of the hydrologic unit boundary for a 12-digit subwatershed. In the attribute field, identify from most significant to least significant modification(s). Use one or more of the following abbreviations in uppercase to identify your modification(s). If using more than one abbreviation, separate with a comma with no space after the comma. SC - Stormwater Canal or Drainage Canal ID - Irrigation Ditch IT - Interbasin Transfer BC - Barge Canal or Navigation Canal SD - Stormwater Ditch PD - Pipe Diversion CD - Channel Diversion NC - Noncontributing Area KA - Karst LE - Levee NM - No Modifications OC - Overflow Channel or Flume DM - Dam at outlet or HU boundary GC - General Canal/Ditch PS - Pumping Station DD - Drainage Ditch SI - Siphon AD - Aqueduct RS - Reservoir TF - Transportation Feature (road, railroad, docks etc.) GF - Ground-Water Flow MA - Mining Activity UA - Urban Area GL - Glacier IF - Ice Field OF - Overbank Flow OT - Other Hu_12_type: Sixth Level Hydrologic Unit Type - (REQUIRED) Populate this field with the hydrologic unit type from the list provided that most closely identifies the subwatershed. Use any of the one digit abbreviations in uppercase that is provided in the list. S - "Standard" hydrologic unit - Any land HU with drainage flowing to a single outlet point, excluding non-contributing areas. This includes areas or small triangular wedges between adjacent HU's that remain after classic hydrologic units are delineated. Some examples include "true", "classic", "composite", and "remnant" hydrologic units. C - "Closed Basin" hydrologic unit - A drainage area that is 100% non-contributing. This means all surface flow is internal, no overland flow leaves the hydrologic unit through the outlet point. F - "Frontal" hydrologic unit - Areas along the coastline of lakes, oceans, bays, etc. that have more than one outlet. These HU's are predominantly land with some water at or near the outlet(s). W - "Water" hydrologic unit - Hydrologic units that are predominantly water with adjacent land areas, ex. lake, easturies. I - "Island" hydrologic unit - A hydrologic unit that is one or more islands and adjacent water out to the toe of the shore face. U - "Unclassified" hydrologic unit - A hydrologic unit that can't be defined or doesn't fit into one of the types that have been listed. HU_10_GNIS#: 5th level GNIS Feature Identification Number - (Field Required, Attribute Optional) The Geographic Names Information System (GNIS) has a unique Feature Identification Number for each officially recognized name in the country. This number is 6-7 characters long. If a hydrologic unit name uses two or mure features, then this field woudl have two GNIS feature numbers with a space separating each number. As of August, 2004 this field does not need to be populated, but plans are to develope a semi_automated method to do this. HU_12_GNIS#: 6th level GNIS Feature Identification Number - (Field Required, Attribute Optional) The Geographic Names Information System (GNIS) has a unique Feature Identification Number for each officially recognized name in the country. This number is 6-7 characters long. If a hydrologic unit name uses two or mure features, then this field woudl have two GNIS feature numbers with a space separating each number. As of August, 2004 this field does not need to be populated, but plans are to develope a semi_automated method to do this. ArcInfo (.pat) and ArcView Polygon Format Item name Width Output Type (ArcView) N.Dec. Example Huc_8 8 8 C - 01080201 Huc_10 10 10 C - 0108020103 Huc_12 12 12 C - 010802010310 Acres 8 12 F N 0 026739 States 11 11 C - KS,MO,OK Ncontrb_a 8 12 F N 0 357 Hu_10_ds 10 10 C - 1710020504 Hu_10_name 80 80 C - Upper Blue River Hu_10_mod 20 20 C - CB,NC,ID Hu_10_type 1 1 C - S Hu_12_ds 12 12 C - 171002050402 Hu_12_name 80 80 C - Drift Creek-Big Bear River Hu_12_mod 20 20 C - SD,KA,PD Hu_12_type 1 1 C - C HU_10_GNIS# 23 23 C - 102354 238437 HU_12_GNIS# 23 23 C - 1023547 2384378 2) .aat attributes Hu_level: Hydrologic Unit Level - (REQUIRED) This field provides the means to create cartographically pleasing maps. Populate this field with the highest hydrologic unit level (smallest number) for the line (arc) represented by the record. Record the level using numbers 1 through 6 representing each level with 1 being the highest and 6 the lowest level. An example would be if a line represents a region, subregion, basin, subbasin, watershed, and subwatershed boundary, then this cell would be populated with a 1 (Region). Example two would be if a line is a subbasin, watershed, and subwatershed boundary, then the cell would get a 4 (Subbasin). Use one of the levels provided in the list below. Level Digit# Name 1 2 Region 2 4 Subregion 3 6 Basin 4 8 Subbasin 5 10 Watershed 6 12 Subwatershed Linesource: Line Spatial Data Source - (REQUIRED) The Linesource should indicate the base map source(s) used to delineate at 1:24,000 scale. Populate the field using one of the standardized code(s) listed below in uppercase. If using more than one code, separate with a comma with no space after the comma. TOPO24 - Delineation from hardcopy 1:24,000 scale topographic maps TOPO25 - Delineation from hardcopy 1:25,000 topgraphic maps, only Alaska and Caribbean TOPO63 - Delineation from hardcopy 1:63,360 topographic maps, only Alaska and Caribbean DRG24 - Delineation from 1:24,000 scale Digital Raster Graphics DRG25 - Delineation from 1:25,000 Digital Raster Graphics, only Alaska and Caribbean DRG63 - Delineation from 1:63,360 Digital Raster Graphics, only Alaska and Caribbean DEM10 - Derived from 10 meter Digital Elevation Model DEM30 - Derived from 30 meter Digital Elevation Model NED30 - Derived from 30 meter National Elevation Dateset Model EDNA30 - (formally NED-H), derived from 30 meter Elevation Derivatives for National Applications BATH"scale" (ex. BATH24) - Interpreted from NOAA 1:24,000 scale bathymetric data HYPSO"scale" (ex. HYPSO24)- Delineated from 1:24,000 scale contour data ORTHO"scale" (ex. ORTHO12) - Interpreted from 1:12,000 scale Ortho-imagery DEDEM10 - Drainage enforced 10 meter Digital Elevation Model DEDEM30 - Drainage enforced 30 meter Digital Elevation Model GPS - Derived from Global Positioning System LIDAR - Derived from LIDAR IFSAR - Derived from IFSAR data OTH - Other UNK - Unknown All other reference and source maps not listed should be noted in the metadata. Meta_id: Metadata ID Number - (REQUIRED) Metadata ID is a code that identifies which metadata file applies to the arc. In many cases there will only be one metadata file. However, in some cases more than one metadata file may be created to identify different groups and/or procedures used to produce the lines. These separate metadata files may be identified for each separate arc. The metadata ID should be a 4-character code starting with the 2-letter state postal code, followed by a 2-digit sequence number. For example "OK01", "ID02", etc. ArcInfo Line (.aat) Attribute Format Item name Width Output Type N.Dec. Example Hu_level 1 1 I - 6 Linesource 20 20 C - DEM30,DRG24,GPS Meta_id 4 4 C - OK01



Entity and Attribute Detail Citation
Federal Standard for Delineation of Hydrologic Unit Boundaries





Metadata Details 

Metadata language English (UNITED STATES)
Metadata character set  utf8 - 8 bit UCS Transfer Format


Scope of the data described by the metadata  dataset
Scope name* dataset


Last update 2017-01-12


ArcGIS metadata properties
Metadata format ArcGIS 1.0
Standard or profile used to edit metadata ISO19139


Created in ArcGIS for the item 2010-06-03 10:47:00
Last modified in ArcGIS for the item 2017-07-20 09:58:11


Automatic updates
Have been performed Yes
Last update 2017-07-20 09:58:11


Metadata Contacts 

Metadata contact
Individual's name Arkansas Geographic Information Systems Office
Organization's name State of Arkansas
Contact's role  point of contact


Contact information
Phone
Voice 501-682-2676
Fax 501-682-6077

Address
Type both
Delivery point 1 Capitol Mall Suite 6D
City Little Rock
Administrative area AR
Postal code 72201
e-mail addresscommunication@arkansasgisoffice.org



Thumbnail and Enclosures 

FGDC Metadata (read-only) 

Entities and Attributes 

Detailed Description
Entity Type
Entity Type Labelasdi.WATER.WBD_HU_COMBINED_2010

Attribute
Attribute Labelobjectid
Attribute Definition
Internal feature number.
Attribute Definition SourceEsri
Attribute Domain Values
Unrepresentable Domain
Sequential unique whole numbers that are automatically generated.

Attribute
Attribute Labelhuc_8

Attribute
Attribute Labelhuc_10

Attribute
Attribute Labelhuc_12

Attribute
Attribute Labelacres

Attribute
Attribute Labelncontrb_a

Attribute
Attribute Labelhu_10_gnis

Attribute
Attribute Labelhu_12_gnis

Attribute
Attribute Labelhu_10_ds

Attribute
Attribute Labelhu_10_name

Attribute
Attribute Labelhu_10_mod

Attribute
Attribute Labelhu_10_type

Attribute
Attribute Labelhu_12_ds

Attribute
Attribute Labelhu_12_name

Attribute
Attribute Labelhu_12_mod

Attribute
Attribute Labelhu_12_type

Attribute
Attribute Labelmeta_id

Attribute
Attribute Labelstates

Attribute
Attribute Labelse_anno_cad_data

Attribute
Attribute Labelshape
Attribute Definition
Feature geometry.
Attribute Definition SourceEsri
Attribute Domain Values
Unrepresentable Domain
Coordinates defining the features.

Attribute
Attribute Labelshape.STArea()

Attribute
Attribute Labelshape.STLength()

Overview Description
Entity and Attribute Overview
                            1) .pat attributes Huc_8 : Eight Digit Hydrologic Unit Code - (REQUIRED) A unique 8-digit code from the USGS map series "Hydrologic Unit Maps". The same number was used in every record that pertains to a subwatershed that resides within the same 8-digit sub-basin.Numbers were assigned in an upstream to downstream fashion. Where no downstream/upstream relationship could be determined numbers were assigned in a clockwise fashion. Huc_10: Ten Digit Hydrologic Unit Code - (REQUIRED) This field provides a unique 10-digit code for each watershed. This same number was used in every record that pertains to a subwatershed that resides within the same 10-digit watershed. Numbers were assigned in an upstream to downstream fashion. Where no downstream/upstream relationship could be determined numbers were assigned in a clockwise fashion. Huc_12: Twelve Digit Hydrologic Unit Code - (REQUIRED) This field provides a unique 12-digit code for each subwatershed. Numbers were assigned in an upstream to downstream fashion. Where no downstream/upstream relationship could be determined numbers were assigned in a clockwise fashion. Acres: Acres - (REQUIRED) Area of subwatershed including non-contributing areas calculated to acres as a whole number, no decimals. The "Acres" field was calculated from the "Area" field. States: States - (REQUIRED) The "States" field includes the names of all state(s) that the subwatershed falls within. The 2-digit postal abbreviation in upper case and in alphabetical order was used, separated with a comma. Ncontrb_a: Non-Contributing Area - (FIELD REQUIRED, ATTRIBUTES OPTIONAL) Drainage areas that do not flow toward the outlet of any hydrologic unit are considered non-contributing. If a non-contributing area is on the boundary between two or more hydrologic units, the non-contributing area is associated with the hydrologic unit adjacent to the low point on the boundary. This attribute should be the total of the non-contributing areas within a hydrologic unit calculated in acres. Hu_10_ds: Fifth Level Downstream Hydrologic Unit Code - (FIELD REQUIRED, ATTRIBUTES OPTIONAL) This field has the 10-digit code of the 5th level hydrologic unit that is receiving the majority of the flow from the watershed that the 6th level HU falls within. Outlets created by ditching or other artificial drainage were not considered for this field. If an HU flows into an ocean or the Gulf of Mexico, this field was populated with "OCEAN" and if a HU flows into one of the Great Lakes the term "LAKE" was used. If a HU flows across international borders, "CANADA" or "MEXICO" was used depending on which country the HU drains into. If an HU is a closed basin, then the term "CLOSED BASIN"was used. Hu_10_name: Fifth Level Hydrologic Unit Name - (FIELD REQUIRED, ATTRIBUTES OPTIONAL) This field used officially recognized names only. This field was populated by following the directions in subsection 6.3 "Watershed and Subwatershed Naming Protocol". The name used to attribute the watershed was used only once within a 4th level unit. Hu_10_mod: Fifth Level Hydrologic Unit Modifications - (REQUIRED) This field identifies any type of modifications to natural overland flow that alters the location of the hydrologic unit boundary for a 10-digit watershed. This field shows the most significant to least significant modification(s) to the watershed boundary. One or more of the following abbreviations was used. SC - Stormwater Canal or Drainage Canal ID - Irrigation Ditch IT - Interbasin Transfer BC - Barge Canal or Navigation Canal SD - Stormwater Ditch PD - Pipe Diversion CD - Channel Diversion NC - Noncontributing Area KA - Karst LE - Levee NM - No Modifications OC - Overflow Channel or Flume DM - Dam at outlet or HU boundary GC - General Canal/Ditch PS - Pumping Station DD - Drainage Ditch SI - Siphon AD - Aqueduct RS - Reservoir TF - Transportation Feature (road, railroad, docks etc.) GF - Ground-Water Flow MA - Mining Activity UA - Urban Area GL - Glacier IF - Ice Field OF - Overbank Flow OT - Other Hu_10_type: Fifth Level Hydrologic Unit Type - (REQUIRED) Populate this field with the hydrologic unit type from the list provided that most closely identifies the watershed. Use any of the one-digit abbreviations in uppercase that is provided in the list. S - "Standard" hydrologic unit - Any land HU with drainage flowing to a single outlet point, excluding non-contributing areas. This includes areas or small triangular wedges between adjacent HU's that remain after classic hydrologic units are delineated. Some examples include "true", "classic", "composite", and "remnant" hydrologic units. C - "Closed Basin" hydrologic unit - A drainage area that is 100% non-contributing. This means all surface flow is internal, no overland flow leaves the hydrologic unit through the outlet point. F - "Frontal" hydrologic unit - Areas along the coastline of lakes, oceans, bays, etc. that have more than one outlet. These HU's are predominantly land with some water areas at or near the outlet(s). W - "Water" hydrologic unit - Hydrologic units that are predominantly water with adjacent land areas, ex. lake, easturies, harbors. I - "Island" hydrologic unit - A hydrologic unit that is one or more islands and adjacent water out to the toe of the shore face. U - "Unclassified" hydrologic unit - A hydrologic unit that can't be defined or doesn't fit into one of the types that have been listed. Hu_12_ds: Sixth Level Downstream Hydrologic Unit Code - (FIELD REQUIRED, ATTRIBUTES OPTIONAL) Populate this field with the 12-digit code of the 6th level hydrologic unit that is receiving the majority of the flow from the subwatershed. Outlets created by ditching or other artificial drainage are not to be considered for this field. If a HU flows into an ocean or the Gulf of Mexico populate this field with "OCEAN" and if a HU flows into one of the Great Lakes use the term "LAKE". If a HU flows across international borders use "CANADA" or "MEXICO" depending on which country the HU drains into. If an HU is a closed basin, then populate this record with the term "CLOSED BASIN". Hu_12_name: Sixth Level Hydrologic Unit Name - (FIELD REQUIRED, ATTRIBUTES OPTIONAL) This field is for officially recognized names only. Populate this field by following the directions in subsection 6.3 "Watershed and Subwatershed Naming Protocol". The name used to attribute the subwatershed should be used only once within a 6th level unit. Some 10-digit HU were assigned the huc_12 number when no GNIS name was identified on the DRG-Es. Hu_12_mod: Sixth Level Hydrologic Unit Modifications - (REQUIRED) This field should identify any type of modifications to natural overland flow that alters the location of the hydrologic unit boundary for a 12-digit subwatershed. In the attribute field, identify from most significant to least significant modification(s). Use one or more of the following abbreviations in uppercase to identify your modification(s). If using more than one abbreviation, separate with a comma with no space after the comma. SC - Stormwater Canal or Drainage Canal ID - Irrigation Ditch IT - Interbasin Transfer BC - Barge Canal or Navigation Canal SD - Stormwater Ditch PD - Pipe Diversion CD - Channel Diversion NC - Noncontributing Area KA - Karst LE - Levee NM - No Modifications OC - Overflow Channel or Flume DM - Dam at outlet or HU boundary GC - General Canal/Ditch PS - Pumping Station DD - Drainage Ditch SI - Siphon AD - Aqueduct RS - Reservoir TF - Transportation Feature (road, railroad, docks etc.) GF - Ground-Water Flow MA - Mining Activity UA - Urban Area GL - Glacier IF - Ice Field OF - Overbank Flow OT - Other Hu_12_type: Sixth Level Hydrologic Unit Type - (REQUIRED) Populate this field with the hydrologic unit type from the list provided that most closely identifies the subwatershed. Use any of the one digit abbreviations in uppercase that is provided in the list. S - "Standard" hydrologic unit - Any land HU with drainage flowing to a single outlet point, excluding non-contributing areas. This includes areas or small triangular wedges between adjacent HU's that remain after classic hydrologic units are delineated. Some examples include "true", "classic", "composite", and "remnant" hydrologic units. C - "Closed Basin" hydrologic unit - A drainage area that is 100% non-contributing. This means all surface flow is internal, no overland flow leaves the hydrologic unit through the outlet point. F - "Frontal" hydrologic unit - Areas along the coastline of lakes, oceans, bays, etc. that have more than one outlet. These HU's are predominantly land with some water at or near the outlet(s). W - "Water" hydrologic unit - Hydrologic units that are predominantly water with adjacent land areas, ex. lake, easturies. I - "Island" hydrologic unit - A hydrologic unit that is one or more islands and adjacent water out to the toe of the shore face. U - "Unclassified" hydrologic unit - A hydrologic unit that can't be defined or doesn't fit into one of the types that have been listed. HU_10_GNIS#: 5th level GNIS Feature Identification Number - (Field Required, Attribute Optional) The Geographic Names Information System (GNIS) has a unique Feature Identification Number for each officially recognized name in the country. This number is 6-7 characters long. If a hydrologic unit name uses two or mure features, then this field woudl have two GNIS feature numbers with a space separating each number. As of August, 2004 this field does not need to be populated, but plans are to develope a semi_automated method to do this. HU_12_GNIS#: 6th level GNIS Feature Identification Number - (Field Required, Attribute Optional) The Geographic Names Information System (GNIS) has a unique Feature Identification Number for each officially recognized name in the country. This number is 6-7 characters long. If a hydrologic unit name uses two or mure features, then this field woudl have two GNIS feature numbers with a space separating each number. As of August, 2004 this field does not need to be populated, but plans are to develope a semi_automated method to do this. ArcInfo (.pat) and ArcView Polygon Format Item name Width Output Type (ArcView) N.Dec. Example Huc_8 8 8 C - 01080201 Huc_10 10 10 C - 0108020103 Huc_12 12 12 C - 010802010310 Acres 8 12 F N 0 026739 States 11 11 C - KS,MO,OK Ncontrb_a 8 12 F N 0 357 Hu_10_ds 10 10 C - 1710020504 Hu_10_name 80 80 C - Upper Blue River Hu_10_mod 20 20 C - CB,NC,ID Hu_10_type 1 1 C - S Hu_12_ds 12 12 C - 171002050402 Hu_12_name 80 80 C - Drift Creek-Big Bear River Hu_12_mod 20 20 C - SD,KA,PD Hu_12_type 1 1 C - C HU_10_GNIS# 23 23 C - 102354 238437 HU_12_GNIS# 23 23 C - 1023547 2384378 2) .aat attributes Hu_level: Hydrologic Unit Level - (REQUIRED) This field provides the means to create cartographically pleasing maps. Populate this field with the highest hydrologic unit level (smallest number) for the line (arc) represented by the record. Record the level using numbers 1 through 6 representing each level with 1 being the highest and 6 the lowest level. An example would be if a line represents a region, subregion, basin, subbasin, watershed, and subwatershed boundary, then this cell would be populated with a 1 (Region). Example two would be if a line is a subbasin, watershed, and subwatershed boundary, then the cell would get a 4 (Subbasin). Use one of the levels provided in the list below. Level Digit# Name 1 2 Region 2 4 Subregion 3 6 Basin 4 8 Subbasin 5 10 Watershed 6 12 Subwatershed Linesource: Line Spatial Data Source - (REQUIRED) The Linesource should indicate the base map source(s) used to delineate at 1:24,000 scale. Populate the field using one of the standardized code(s) listed below in uppercase. If using more than one code, separate with a comma with no space after the comma. TOPO24 - Delineation from hardcopy 1:24,000 scale topographic maps TOPO25 - Delineation from hardcopy 1:25,000 topgraphic maps, only Alaska and Caribbean TOPO63 - Delineation from hardcopy 1:63,360 topographic maps, only Alaska and Caribbean DRG24 - Delineation from 1:24,000 scale Digital Raster Graphics DRG25 - Delineation from 1:25,000 Digital Raster Graphics, only Alaska and Caribbean DRG63 - Delineation from 1:63,360 Digital Raster Graphics, only Alaska and Caribbean DEM10 - Derived from 10 meter Digital Elevation Model DEM30 - Derived from 30 meter Digital Elevation Model NED30 - Derived from 30 meter National Elevation Dateset Model EDNA30 - (formally NED-H), derived from 30 meter Elevation Derivatives for National Applications BATH"scale" (ex. BATH24) - Interpreted from NOAA 1:24,000 scale bathymetric data HYPSO"scale" (ex. HYPSO24)- Delineated from 1:24,000 scale contour data ORTHO"scale" (ex. ORTHO12) - Interpreted from 1:12,000 scale Ortho-imagery DEDEM10 - Drainage enforced 10 meter Digital Elevation Model DEDEM30 - Drainage enforced 30 meter Digital Elevation Model GPS - Derived from Global Positioning System LIDAR - Derived from LIDAR IFSAR - Derived from IFSAR data OTH - Other UNK - Unknown All other reference and source maps not listed should be noted in the metadata. Meta_id: Metadata ID Number - (REQUIRED) Metadata ID is a code that identifies which metadata file applies to the arc. In many cases there will only be one metadata file. However, in some cases more than one metadata file may be created to identify different groups and/or procedures used to produce the lines. These separate metadata files may be identified for each separate arc. The metadata ID should be a 4-character code starting with the 2-letter state postal code, followed by a 2-digit sequence number. For example "OK01", "ID02", etc. ArcInfo Line (.aat) Attribute Format Item name Width Output Type N.Dec. Example Hu_level 1 1 I - 6 Linesource 20 20 C - DEM30,DRG24,GPS Meta_id 4 4 C - OK01
                          
Entity and Attribute Detail Citation
                            Federal Standard for Delineation of Hydrologic Unit Boundaries