ADEQ Engineering Institutional Controls


Tags
ADEQ, Arkansas, environment


Summary

This dataset was developed for use in cartographic interfaces.

Description

Approximate bounding areas pertaining to the engineering and institutional controls of properties regulated by the Arkansas Department of Environmental Quality.

Credits

Arkansas Department of Environmental Quality

Use limitations

The data herein, including but not limited to geographic data, tabular data, analytical data, electronic data structures or files, are provided "as is" without warranty of any kind, either expressed or implied, or statutory, including, but not limited to, the implied warranties or merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of the data is assumed by the user. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the Arkansas Geographic Information Systems Board be liable for direct, indirect, incidental, consequential or special damages of any kind, including, but not limited to, loss of anticipated profits or benefits arising out of use of or reliance on the data. The Arkansas Geographic Information Systems Board does not accept liability for any damages or misrepresentation caused by inaccuracies in the data or as a result of changes to the data caused by system transfers or other transformations or conversions, nor is there responsibility assumed to maintain the data in any manner or form. These data have been developed from the best available sources. Although efforts have been made to ensure that the data are accurate and reliable, errors and variable conditions originating from physical sources used to develop the data may be reflected in the data supplied. Users must be aware of these conditions and bear responsibility for the appropriate use of the information with respect to possible errors, scale, resolution, rectification, positional accuracy, development methodology, time period, environmental and climatic conditions and other circumstances specific to these data. The user is responsible for understanding the accuracy limitations of the data provided herein. The burden for determining fitness for use lies entirely with the user. The user should refer to the accompanying metadata notes for a description of the data and data development procedures. Although these data have been processed successfully on computers at the Arkansas Geographic Information Systems Office, no guarantee, expressed or implied, is made by Arkansas Geographic Information Systems Board regarding the use of these data on any other system, nor does the act of distribution constitute or imply any such warranty. Distribution of these data is intended for information purposes and should not be considered authoritative for engineering, legal and other site-specific uses.

Extent

West  -94.402400    East  -90.656455
North  36.365219    South  33.160391

Scale Range

ArcGIS Metadata 

Topics and Keywords 

Themes or categories of the resource  environment


*Content type  Downloadable Data


Place keywords  Arkansas

Theme keywords  ADEQ

Theme keywords  environment

Thesaurus
Title ISO 19115 Topic Category




Citation 

Title ADEQ Engineering Institutional Controls
Publication date 2010-08-16


Presentation formats  digital map
FGDC geospatial presentation format  vector digital data


Citation Contacts 

Responsible party
Organization's name Arkansas Department of Environmental Quality
Contact's role  originator


Responsible party
Organization's name AR Environmental Quality
Contact's role  publisher


Contact information
Address
Delivery point North Little Rock, AR



Resource Details 

Dataset languages  English (UNITED STATES)


Status  under development
Spatial representation type  vector


Processing environment Microsoft Windows 7 Version 6.1 (Build 7601) Service Pack 1; Esri ArcGIS 10.3.0.4322


Credits
Arkansas Department of Environmental Quality

ArcGIS item properties
*Name asdi.environment.ENGINEER_INST_CONTROL_ADEQ
*Location Server=170.94.248.50; Service=sde:postgresql:170.94.248.50; Database=asdi; User=sde; Version=sde.DEFAULT
*Access protocol ArcSDE Connection

Extents 

Extent
Geographic extent
Bounding rectangle
West longitude -94.4024
East longitude -90.656455
South latitude 33.160391
North latitude 36.365219

Vertical extent
*Minimum value 0.000000
*Maximum value 0.000000


Extent
Description
publication date

Temporal extent
Date and time 2010-08-16

Vertical extent
*Minimum value 0.000000
*Maximum value 0.000000


Extent
Geographic extent
Bounding rectangle
Extent type  Extent used for searching
*West longitude -94.402400
*East longitude -90.656455
*North latitude 36.365219
*South latitude 33.160391
*Extent contains the resource Yes

Extent in the item's coordinate system
*West longitude 374173.351700
*East longitude 710319.395300
*South latitude 3671332.940500
*North latitude 4024457.765000
*Extent contains the resource Yes

Resource Points of Contact 

Point of contact
Individual's name Randy Puckett
Organization's name North Little Rock, Arkansas
Contact's position GIS Coordinator
Contact's role  point of contact


Contact information
Phone
Voice (501) 682-0956
Fax (501) 682-0936

Address
Type both
Delivery point 5301 Northshore Drive
City North Little Rock
Administrative area AR
Postal code 72118-5317
Country United States of America
e-mail addresspuckett@adeq.state.ar.us



Resource Maintenance 

Resource maintenance
Update frequency  as needed


Resource Constraints 

Legal constraints
Limitations of use
The data herein, including but not limited to geographic data, tabular data, analytical data, electronic data structures or files, are provided "as is" without warranty of any kind, either expressed or implied, or statutory, including, but not limited to, the implied warranties or merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of the data is assumed by the user. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the Arkansas Geographic Information Systems Board be liable for direct, indirect, incidental, consequential or special damages of any kind, including, but not limited to, loss of anticipated profits or benefits arising out of use of or reliance on the data. The Arkansas Geographic Information Systems Board does not accept liability for any damages or misrepresentation caused by inaccuracies in the data or as a result of changes to the data caused by system transfers or other transformations or conversions, nor is there responsibility assumed to maintain the data in any manner or form. These data have been developed from the best available sources. Although efforts have been made to ensure that the data are accurate and reliable, errors and variable conditions originating from physical sources used to develop the data may be reflected in the data supplied. Users must be aware of these conditions and bear responsibility for the appropriate use of the information with respect to possible errors, scale, resolution, rectification, positional accuracy, development methodology, time period, environmental and climatic conditions and other circumstances specific to these data. The user is responsible for understanding the accuracy limitations of the data provided herein. The burden for determining fitness for use lies entirely with the user. The user should refer to the accompanying metadata notes for a description of the data and data development procedures. Although these data have been processed successfully on computers at the Arkansas Geographic Information Systems Office, no guarantee, expressed or implied, is made by Arkansas Geographic Information Systems Board regarding the use of these data on any other system, nor does the act of distribution constitute or imply any such warranty. Distribution of these data is intended for information purposes and should not be considered authoritative for engineering, legal and other site-specific uses.

Security constraints
Classification  unclassified


Constraints
Limitations of use
The data herein, including but not limited to geographic data, tabular data, analytical data, electronic data structures or files, are provided "as is" without warranty of any kind, either expressed or implied, or statutory, including, but not limited to, the implied warranties or merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of the data is assumed by the user. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the Arkansas Geographic Information Systems Board be liable for direct, indirect, incidental, consequential or special damages of any kind, including, but not limited to, loss of anticipated profits or benefits arising out of use of or reliance on the data. The Arkansas Geographic Information Systems Board does not accept liability for any damages or misrepresentation caused by inaccuracies in the data or as a result of changes to the data caused by system transfers or other transformations or conversions, nor is there responsibility assumed to maintain the data in any manner or form. These data have been developed from the best available sources. Although efforts have been made to ensure that the data are accurate and reliable, errors and variable conditions originating from physical sources used to develop the data may be reflected in the data supplied. Users must be aware of these conditions and bear responsibility for the appropriate use of the information with respect to possible errors, scale, resolution, rectification, positional accuracy, development methodology, time period, environmental and climatic conditions and other circumstances specific to these data. The user is responsible for understanding the accuracy limitations of the data provided herein. The burden for determining fitness for use lies entirely with the user. The user should refer to the accompanying metadata notes for a description of the data and data development procedures. Although these data have been processed successfully on computers at the Arkansas Geographic Information Systems Office, no guarantee, expressed or implied, is made by Arkansas Geographic Information Systems Board regarding the use of these data on any other system, nor does the act of distribution constitute or imply any such warranty. Distribution of these data is intended for information purposes and should not be considered authoritative for engineering, legal and other site-specific uses.

Spatial Reference 

ArcGIS coordinate system
*Type Projected
*Geographic coordinate reference GCS_North_American_1983
*Projection NAD_1983_UTM_Zone_15N
*Coordinate reference details
Projected coordinate system
Well-known identifier 26915
X origin -5120900
Y origin -9998100
XY scale 10000
Z origin -100000
Z scale 10000
M origin -100000
M scale 10000
XY tolerance 0.001
Z tolerance 0.001
M tolerance 0.001
High precision true
Latest well-known identifier 26915
Well-known text PROJCS["NAD_1983_UTM_Zone_15N",GEOGCS["GCS_North_American_1983",DATUM["D_North_American_1983",SPHEROID["GRS_1980",6378137.0,298.257222101]],PRIMEM["Greenwich",0.0],UNIT["Degree",0.0174532925199433]],PROJECTION["Transverse_Mercator"],PARAMETER["False_Easting",500000.0],PARAMETER["False_Northing",0.0],PARAMETER["Central_Meridian",-93.0],PARAMETER["Scale_Factor",0.9996],PARAMETER["Latitude_Of_Origin",0.0],UNIT["Meter",1.0],AUTHORITY["EPSG",26915]]

Reference system identifier
*Value 26915
*Codespace EPSG
*Version 8.2.6


Spatial Data Properties 

Vector
*Level of topology for this dataset  geometry only


Geometric objects
Feature class name asdi.environment.ENGINEER_INST_CONTROL_ADEQ
*Object type  composite
*Object count 24



ArcGIS Feature Class Properties
Feature class name asdi.environment.ENGINEER_INST_CONTROL_ADEQ
*Feature type Simple
*Geometry type Polygon
*Has topology FALSE
*Feature count 24
*Spatial index TRUE
*Linear referencing TRUE



Data Quality 

Lineage 

Process step
When the process occurred 2009-12-01 14:53:41
Description
Data was created according to ADEQ processes and is provided to GeoStor following updates.



Process contact
Individual's name Randy Puckett
Organization's name Arkansas Department of Environmental Quality
Contact's role  processor




Geoprocessing history 

Distribution 

Distributor
Contact information
Individual's name Arkansas GIS Office
Organization's name State of Arkansas
Contact's role  distributor


Contact information
Phone
Voice 501-682-2929

Address
Type physical
Delivery point 1 Capitol Mall, Suite 6D
City Little Rock
Administrative area AR
Postal code 72212
Country US
e-mail addresscommunication@arkansasgisoffice.org



Ordering process

Transfer options
Online source
Locationhttp://gis.arkansas.gov/product/adeq-engineering-institutional-controls/

Online source
Location https://gis.arkansas.gov/arcgis/rest/services/FEATURESERVICES/Environment/FeatureServer/9



Distribution format
*Name SDE Feature Class


Transfer options
Online source
Locationhttp://gis.arkansas.gov

Fields 

Details for object asdi.environment.ENGINEER_INST_CONTROL_ADEQ 
*Type Feature Class
*Row count 24


Field OBJECTID
 
*Alias OBJECTID
*Data type OID
*Width 4
*Precision 10
*Scale 0
Field description
Internal feature number.

Description source
ESRI

Description of values
Sequential unique whole numbers that are automatically generated.





Field Acreage
 
*Alias ACREAGE
*Data type Double
*Width 8
*Precision 38
*Scale 8




Field AFIN
 
*Alias AFIN
*Data type String
*Width 254
*Precision 0
*Scale 0




Field Shape
 
*Alias Shape
*Data type Geometry
*Width 4
*Precision 0
*Scale 0
Field description
Feature geometry.

Description source
ESRI

Description of values
Coordinates defining the features.





Field st_area(shape)
 
*Alias st_area(shape)
*Data type Double
*Width 0
*Precision 0
*Scale 0




Field st_length(shape)
 
*Alias st_length(shape)
*Data type Double
*Width 0
*Precision 0
*Scale 0




Field COMMENT_
 
*Alias COMMENT_
*Data type String
*Width 254
*Precision 0
*Scale 0




Field globalid
 
*Alias globalid
*Data type GlobalID
*Width 38
*Precision 0
*Scale 0




Field SE_ANNO_CAD_DATA
 
*Alias SE_ANNO_CAD_DATA
*Data type Blob
*Width 0
*Precision 0
*Scale 0




Field Name
 
*Alias NAME
*Data type String
*Width 254
*Precision 0
*Scale 0




Field SHAPE_LENG
 
*Alias SHAPE_LENG
*Data type Double
*Width 8
*Precision 38
*Scale 8




Field Permit
 
*Alias PERMIT
*Data type String
*Width 254
*Precision 0
*Scale 0






Metadata Details 

Metadata language English (UNITED STATES)
Metadata character set  utf8 - 8 bit UCS Transfer Format


Scope of the data described by the metadata  dataset
Scope name* dataset


Last update 2017-01-12


ArcGIS metadata properties
Metadata format ArcGIS 1.0
Standard or profile used to edit metadata ISO19139


Created in ArcGIS for the item 2012-03-23 16:41:09
Last modified in ArcGIS for the item 2017-01-19 11:49:33


Automatic updates
Have been performed Yes
Last update 2017-01-19 11:49:33


Metadata Contacts 

Metadata contact
Individual's name Randall Puckett
Organization's name Arkansas Department of Environmental Quality
Contact's position GIS Coordinator
Contact's role  point of contact


Contact information
Phone
Voice (501) 682-0956
Fax (501) 682-0936

Address
Type both
Delivery point 5301 Northshore Drive
City North Little Rock
Administrative area AR
Postal code 72118-5317
Country United States of America
e-mail addresspuckett@adeq.state.ar.us



Metadata Constraints 

Security constraints
Classification  unclassified


Thumbnail and Enclosures 

FGDC Metadata (read-only) 

Entities and Attributes